Medical Dry Laser Film (Infrared Laser)

Category:

Medical dry laser film

This product uses a blue polyester base as its support, with imaging and protective layers coated on both sides, containing light-sensitive silver halide components. It is designed for printing medical images that have been digitally stored after computer processing, faithfully reproducing a wide range of digitally processed medical images while eliminating the traditional silver‑halide development, fixing, and washing processes, thereby completely removing environmental pollution caused by waste chemicals from these conventional procedures. The film features low fog, high resolution, high density, vibrant tones, and ease of use, and can be directly used with commercially available medical laser printers.

关键词：Medical Dry Laser Film (Infrared Laser)

Consult now:

0514-86662359

Product Inquiry

Related products

Product Description

　　This product uses a blue polyester base as its support, with imaging and protective layers coated on both sides, containing light-sensitive silver halide components. It is designed for printing medical images that have been digitally stored after computer processing, faithfully reproducing a wide range of digitally processed medical images while eliminating the traditional silver‑halide development, fixing, and washing processes, thereby completely removing environmental pollution caused by waste chemicals from these conventional procedures. The film features low fog, high resolution, high density, vibrant tones, and ease of use, and can be directly used with commercially available medical laser printers.
　　Storage environment
　　Store in the original packaging in a dry, cool, dust‑free room, protected from direct sunlight and corrosive acidic or alkaline gases. Specific requirements: 1. Temperature: 10°C–35°C; relative humidity: 30%–65%; keep away from heat sources. 2. Gases: The storage area must be free of acidic gases such as hydrogen sulfide, ammonia, sulfur dioxide, and formaldehyde. 3. Storage method: Store upright to prevent pressure‑induced adverse effects.
　　 Validity period: 24 months (stored under the above conditions)
　　Operating environment
　　Optimal operating temperature: 16°C–20°C; relative humidity: 50%–65%.
　　Film parameters
　　1. Film material: Composed of a polyethylene terephthalate (PET) base coated with a silver halide layer and a protective coating.
　　2. Printing technology and principle: Infrared laser imaging technology, single-shot imaging, with no need to add developing chemicals or other printing materials.
　　3. Minimum film density: ≤0.15 D
　　4. Maximum film density: ≥3.0 D
　　5. Resolution: 508 dpi / 650 dpi
　　6. Output grayscale: 14-bit
　　7. Film base thickness: ≥200 µm
　　8. Film material: biodegradable, non‑toxic and odorless, pollution‑free, flame‑retardant, waterproof and antistatic, with no usage restrictions.
　　Product Specifications
Size Pieces/Box Box/Carton
in centimeter
14×17 35×43 100 5
11×14/10×14 28×36/26×36 150 5
10×12 25×30 150 5
8×10 20×25 150 5

Product Inquiry

Please provide the following valid information, and we will contact you as soon as possible.

Submit

Size		Pieces/Box	Box/Carton
in	centimeter	Pieces/Box	Box/Carton
14×17	35×43	100	5
11×14/10×14	28×36/26×36	150	5
10×12	25×30	150	5
8×10	20×25	150	5